New Stim L23 boat trailer
Medynia Głogowska
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
![Zakład Produkcji Przyczep i Nadwozi "STIM" Małecki s.j.](https://autoline.com/img/dealers/logos/1/d/1603534671829440120_cropped-120px.webp "Zakład Produkcji Przyczep i Nadwozi "STIM" Małecki s.j.")
Poland 
5,556 lb
Net weight
2,161 lb
Poland, Medynia Głogowska
5,666 lb
Net weight
2,050 lb
Poland, Medynia Głogowska
970 lb
Poland, Medynia Głogowska
1,587 lb
Poland, Medynia Głogowska
352.7 lb
Net weight
1,301 lb
Poland, Medynia Głogowska
Poland, Medynia Głogowska
4,453 lb
Net weight
1,499 lb
Poland, Medynia Głogowska
2,866 lb
Net weight
1,102 lb
Poland, Medynia Głogowska
1,323 lb
Net weight
330.7 lb
Poland, Medynia Głogowska
Poland, Medynia Głogowska
4,542 lb
Net weight
1,411 lb
Poland, Medynia Głogowska
1,940 lb
Net weight
1,014 lb
Poland, Medynia Głogowska
4,453 lb
Net weight
1,499 lb
Poland, Medynia Głogowska
5,004 lb
Net weight
1,609 lb
Poland, Medynia Głogowska
Poland, Medynia Głogowska
Poland, Medynia Głogowska
Poland, Medynia Głogowska
2,094 lb
Net weight
771.6 lb
Poland, Medynia Głogowska
3,527 lb
Net weight
1,543 lb
Poland, Jacków
Poland, Medynia Głogowska
- Dimensions: 930x200cm
- Permissible total weight of the trailer: GVM up to 3500 kg
- Own weight: approx. 1000 kg
- Number of axles: 3 axles braked 18,000 kg of the German company KNOTT
EQUIPMENT
- 3 braked axles of the Neidhartd type based on torsion shafts of the German company KNOTT with a load capacity of 1800 kg each
- locked axles with a boat tandem with the possibility of front-rear adjustment, with an additional WATERPROFF system
- KNOTT overrun device up to 3500 kg, with a ball hitch up to 3500 kg
- 195R14C tubeless wheels
- 195R14C spare wheel
- frame structure profiled, made of high-strength steel, welded and hot-dip galvanized, bottom profile 100x40, top profile 60x40
- AL-KO type 901 manual winch with a steel rope
- plastic fenders with mud flaps (if necessary, shift the axle, it goes automatically front rear with axles)
- AL-KO 500kg reinforced support wheel
- adjustable bow in each direction (forward-backward, up-down) with a double rubber bow
- 6 yellow double bottom rollers, stuck together
- 2 fully adjustable side skids 2 x L-3000mm and 4 point side supports in the front part
- at the rear, a bottom roller with introducing pins, swinging
- LED clearance lighting
- LED rear lamps
- all lamp connections are soldered
- rear lighting beam, extendable about 2 meters, completely removable for the time of loading
- holders for belts welded to the frame
- rear marking plates on the lighting beam
- axle shock absorbers
- driving stabilizer
Electrical installation in accordance with the Polish Standard
European approval
12-month warranty
ADDITIONAL EQUIPMENT FOR AN ADDITIONAL CHARGE
- LED BOX lamp module
- tool box
- Transport lines
- TUV DEKRA "TEMPO 100"