New Fliegl Tandem-Plattformanhänger Bau TPS 118 Bau equipment trailer
Triptis
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
32,630 lb
Net weight
7,055 lb
Germany, Triptis
63,670 lb
Net weight
13,490 lb
Germany, Triptis
68,560 lb
Net weight
8,598 lb
Germany, Triptis
68,340 lb
Net weight
17,640 lb
Germany, Triptis
61.73 lb
Net weight
13.23 lb
Germany, Triptis
23,810 lb
Net weight
5,732 lb
Germany, Triptis
97,440 lb
Net weight
28,220 lb
Germany, Triptis
34,170 lb
Net weight
18,740 lb
Germany, Triptis
33,360 lb
Net weight
6,332 lb
Germany, Triptis
61,290 lb
Net weight
15,870 lb
Germany, Triptis
78,900 lb
Net weight
13,700 lb
Germany, Triptis
75,180 lb
Net weight
10,800 lb
Germany, Triptis
63,160 lb
Net weight
9,590 lb
Germany, Triptis
46,650 lb
Net weight
10,670 lb
Germany, Triptis
66,840 lb
Net weight
10,570 lb
Germany, Triptis
61,130 lb
Net weight
16,030 lb
Germany, Triptis
76,920 lb
Net weight
68,590 lb
Germany, Triptis
17,640 lb
Net weight
5,512 lb
Germany, Triptis
39,130 lb
Net weight
13,780 lb
Germany, Triptis
68,960 lb
Net weight
17,020 lb
Germany, Triptis
Trailer parts
Functionality: fully functional
Location: Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland
Chassis: Center-axle trailer
Coupling device: Center-axle trailer
Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS!
Note: Slight floor waviness due to welding distortion is possible!
axle configuration: 2 axles
Customized Transport Solution
Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs
Fine-grained steel welded construction
Outer frame slightly angled
new design with "Load-Lock profile" for tie-down straps
3 pairs of lashing eyes outside in the floor
each 5 tons
1 at the front in the corners
1 in front of and 1 in the rear incline at the back
6 pairs of lashing eyes outside in the floor/outer frame
each 5 tons
Gearbox support leg at the front
Rear support
foldable
2 wheel chocks with holder
Aluminum side impact protection
Steel underrun protection
galvanized
Splash guards at the rear covering the entire width (not in combination with forklift mount)
Quarter panel fenders
1 plastic toolbox
w=600 / h=425 / d=460 mm
lockable
Drawbar with tested 40 mm drawbar eye
Drawbar height-adjustable via spindle
max. adjustment range 300 mm
Axles + Suspension
GFA or BPW axles
at the manufacturer's choice
with tapered roller bearing and S-cam brake
Bdsc Ahq D Hezcqpasmjg
"Axle/chassis laser-aligned" - reduces tire wear and fuel consumption
Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (lever compensation)
Braking System
2-line compressed air brake system
Color-coded line routing for easy servicing
Hand-spindle parking brake
2 fail-safe coupling heads at the front
with connecting lines to the towing vehicle
24 volt ABS and ALB
with ABS connector at the front
with connecting cable
Wheels and Tires
235/75 R17.5
manufacturer's choice
Steel rims
factory silver
Electrical System
24 volt
multi-chamber lights
yellow LED lighting on the sides
2 white position lights at the front
in LED
2 white/red marker lights at the rear
2 x 7-pole fail-safe plugs at the front
with connecting cable
Floor
Steel/diamond plate floor for high point load capacity
Platform length approx. 6,200 mm
Rear incline to approx. 900 mm
Front wall / corner posts at the front
25 mm aluminum hollow profile
400 mm high
Side walls
25 mm aluminum hollow profile
400 mm high
foldable and removable
Rear wall / corner posts at the rear
1 pair of steel uprights attached to the frame
with brackets for locking the access ramps
access width approx. 2,430 mm
Access Ramps
Steel ramps 2,300 mm long
510 mm wide
laterally movable
With handrail on the ramps
Covered with wood (tip area with steel/diamond plate)
With gas spring for one-person operation
Operating Instructions
The stated total weight is technically possible
depending on the cargo
the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and following behavior possible due to incorrect load distribution)
Country of Registration / Signs
Germany
With DEKRA inspection and certificate (according to §13 EG - FGV)
24/7 service hotline
Prepared for single-row license plate holder
Contour marking with reflective strips according to ECE R 048
white on the sides and red at the rear
Paintwork
Frame DB 7350 Novagrau
"10-year warranty against rusting"
Front wall Aluminum
Side wall Aluminum
anodized
Access ramps Hot-dip galvanized
Customized Transport Solution