New D-Tec FLEXITRAILER FT container chassis semi-trailer
Kesteren6542 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+40 720 01...
Show
+40 720 010 211
+40 734 22...
Show
+40 734 222 315
Netherlands 
Netherlands, Veghel
Netherlands, Veghel
85,070 lb
Net weight
9,731 lb
Netherlands, Kesteren
87,040 lb
Net weight
9,963 lb
Netherlands, Kesteren
Netherlands, Veghel
86,280 lb
Net weight
10,720 lb
Netherlands, Kesteren
Netherlands, Veghel
86,730 lb
Net weight
10,270 lb
Netherlands, Vuren
86,660 lb
Net weight
10,340 lb
Netherlands, Goes
86,630 lb
Net weight
10,370 lb
Netherlands, Goes
86,180 lb
Net weight
10,820 lb
Netherlands, Goes
86,310 lb
Net weight
10,690 lb
Romania, ROMAN
78,710 lb
Net weight
7,275 lb
Netherlands, Roosendaal
11,730 lb
Netherlands, Mill
78,760 lb
Net weight
11,630 lb
Netherlands, Goes
78,750 lb
Net weight
7,231 lb
Netherlands, Roosendaal
D-TEC FLEXITRAILER FT-LS-LS-S (S-Line). Multifunctional 3-axle container chassis, suitable for 45' (2-deck), 40' (2-deck), 30', 2x 20' and 20' containers at the rear.
D-TEC choose conventional braking system
Conventional air suspension
Valx axles with disk brakes Ø 430 mm, 9 tons. 120 offset wheels.
First axle can be raised automatically. Raising and lowering of the axle is managed by the EBS computer. Also operated by a switch on the chassis or by stepping on the brake 3x. With traction support: Increased maximum load on axles 2 and 3 by up to 130% up to 30 km/h.
Tire size 385/65 R22.5 tires. Fifth wheel height: 1180 mm.
Tire brand: Apollo Vredestein
Standard steel rims.
Removable steel container stops to guide the front of the container.
D-TEC select tire pressure monitoring system according to R141
Blue mudguards
Metallization of the upper part of the chassis (zincmetal coating treatment), except suspension points.
Paint coating 2K RAL 5015 or 9005, matt. (Paint directly on metal).
D-TEC select lighting brand.
Soc socket with 15 cores on the front side, together with sockets with 2x7 ISO N+S cores. Note: 2x7 pole is not allowed with ADR.
Flashing side signal lights
COC documents for country of destination.
ECE 70 marking plates
Available 3 identical units with EXW lift EXW Kesteren Netherlands - August/September 2024.
D-TEC FLEXITRAILER FT-LS-S (S-Line). Șasiu multifuncțional cu 3 axe pentru containere, potrivitpentru containere de 45' (2 ampatamente), 40' (2ampatamente), 30', 2x 20' și 20' în spate.
D-TEC alege sistemul de frânare convențional
Suspensie pneumatică convențională
Punți Valx cu frâne pe disc Ø 430 mm, 9 tone. Jante cu offset 120.
Prima osie poate fi ridicată automat. Ridicarea și coborârea punții este gestionată de computerul EBS. De asemenea, acționat de un comutator pe șasiu sau prin călcarea frânei 3x. Cu suport de tracțiune: Creșterea sarcinii maxime pe axa 2 și 3 cu până la 130%, până la 30 km/h.
Dimensiunea anvelopelor 385/65 R22,5. Înălțimea celei de-a cincea roți: 1180 mm.
Marcă de anvelope: Apollo Vredestein
Jante standard din oțel.
Opritoare de container din oțel, detașabile, pentru ghidarea părții frontale a containerului.
D-TEC alege sistemul de monitorizare a presiunii înpneuri conform R141
Apărătoare de noroi albastră
Metalizarea părții superioare a șasiului (tratament cu strat de zincmetal), cu excepția punctelor de suspensie.
Strat de vopsire 2K RAL 5015 sau 9005, mat. (Vopsea direct pe metal).
D-TEC alege marca de iluminat.
Soclu cu 15 nuclee pe partea frontală, alături de prize cu 2x7 nuclee ISO N+S. Atenție: Polul 2x7 nu este permis cu ADR.
Lumini de semnalizare laterală intermitente
Documente COC pentru țara de destinație.
Plăcuțe de marcare ECE 70
Disponibile 3 unitati identice cu ridicare EXW Kesteren Olanda - August/Septembrie 2024.
D-TEC FLEXITRAILER FT-LS-LS-S (S-Line). Багатофункціональне 3-осьове контейнерне шасі, підходить для контейнерів 45' (2-поверховий), 40' (2-поверховий), 30', 2x 20' і 20' ззаду.
D-TEC обирає звичайну гальмівну систему
Звичайна пневматична підвіска
Осі Valx з дисковими гальмами Ø 430 мм, 9 тонн. 120 зміщених дисків.
Перша вісь може підніматися автоматично. Підняттям і опусканням осей керує комп'ютер EBS. Також керується перемикачем на шасі або 3-кратним натисканням на гальмо. З підтримкою тяги: збільшене максимальне навантаження на осі 2 і 3 на 130% до 30 км/год.
Розмір шин 385/65 R22.5. Висота сідельно-зчіпного пристрою: 1180 мм.
Бренд шин: Apollo Vredestein
Стандартні сталеві диски.
Знімні сталеві упори для контейнера, що направляють передню частину контейнера.
Система контролю тиску в шинах D-TEC select до R141
Синій бризковик
Металізація верхньої частини шасі (цинкове покриття), крім точок підвіски.
2K RAL 5015 або 9005, матовий. (Фарба наноситься безпосередньо на метал).
D-TEC вибирає марку освітлення.
Розетка Soc з 15 жилами на передній панелі, разом з розетками з 2х7 жилами ISO N+S. Зверніть увагу: 2х7 полюсів не дозволено в ADR.
Миготливі бічні сигнальні вогні
Документи COC для країни призначення.
Маркувальні таблички ECE 70
Доступні 3 однакові одиниці з відвантаженням EXW Кестерен, Нідерланди - серпень/вересень 2024 року.