New Bull Trailers Taurus low bed semi-trailer
Frosinone7636 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+39 347 726...
Show
+39 347 726 0640
+39 335 826...
Show
+39 335 826 6119
Italy 
62,830 lb
Net weight
23,150 lb
Italy, Frosinone
61,730 lb
Net weight
24,250 lb
Italy, Frosinone
40,790 lb
Net weight
20,940 lb
Italy, Frosinone
54,010 lb
Net weight
25,350 lb
Italy, Frosinone
61,730 lb
Net weight
24,250 lb
Italy, Frosinone
61,730 lb
Net weight
26,460 lb
Italy, Frosinone
61,290 lb
Net weight
24,690 lb
Italy, Frosinone
61,290 lb
Net weight
26,460 lb
Italy, Frosinone
61,290 lb
Net weight
24,690 lb
Italy, Frosinone
61,290 lb
Net weight
24,690 lb
Italy, Frosinone
61,730 lb
Net weight
24,250 lb
Italy, Frosinone
61,730 lb
Net weight
24,250 lb
Italy, Frosinone
67,460 lb
Net weight
18,520 lb
Italy, Frosinone
57,320 lb
Net weight
26,460 lb
Italy, Frosinone
62,830 lb
Net weight
23,150 lb
Italy, Frosinone
36,820 lb
Net weight
12,350 lb
Italy, Frosinone
58,420 lb
Italy, FROSINONE FR
105,800 lb
Net weight
84,880 lb
Italy, FROSINONE FR
119,000 lb
Italy, Milan
Italy, Santerno Ravenna (RA)
Chassis: 225108
Available by appointment – Made in Bulgaria – European Type Approved
Main Features:
• 3 ROR axles, 11-ton capacity, with air suspension and drum brakes (Made by Stefen – Verona)
• 1st liftable axle – 3rd self-steering axle
• GVW: 39,000 kg – Payload: 28,000 kg – Tare: 11,000 kg
• High-strength steel chassis (S 420 / S 500)
Dimensions:
• Total length: 13.70 m – Lower deck length: 10.00 m
• Width: 2.54 m – Deck height: 88 cm – Kingpin height: 120 cm
Systems and Safety:
• EBS + ASR anti-rollover braking system (Knorr Bremse)
• MultiLED II lighting system (Aspöck)
• Pneumatic valve for deck height adjustment
• Manual rear support legs
Lashing and Pre-Fittings:
• 6 ring hooks (3 per side)
• 16 recessed tie-down slots on deck (8 per side)
• Additional slots on side rails
• Gooseneck ramp preparation
• Front-mounted hydraulic winch preparation
Included Equipment:
• Two-piece electrohydraulic ramps (3600 x 800 mm)
• 12 Continental 235/75 R 17.5 tyres – steel rims
• 2 toolboxes mounted on gooseneck
• Raised front edge on gooseneck
Construction and Warranty:
• Made in Bulgaria – European type-approved
• Warranty: 5 years on chassis – Other components as per regulations
For information and viewing by appointment:
Phone: show contacts (Emanuele)
Office: show contacts
YouTube: show contacts
Instagram: show contacts
Facebook: show contacts
Website: show contacts
Telaio: 225108
Disponibile su appuntamento – Produzione Bulgaria – Omologazione Europea
Caratteristiche principali:
• 3 assali ROR da 11 ton con sospensioni pneumatiche e freni a tamburo (prodotti da Stefen – Verona)
• 1° asse sollevabile – 3° asse autosterzante
• Massa complessiva: 39.000 kg – Portata utile: 28.000 kg – Tara: 11.000 kg
• Telaio in acciaio alto resistenziale S 420 / S 500
Dimensioni:
• Lunghezza totale: 13,70 m – Lunghezza utile piano basso: 10,00 m
• Larghezza: 2,54 m – Altezza pianale: 88 cm – Altezza sotto ralla: 120 cm
Sistemi e Sicurezza:
• Sistema frenante EBS + ASR antiribaltamento (Knorr Bremse)
• Impianto elettrico MultiLED II (Aspöck)
• Valvola pneumatica per regolazione altezza pianale
• Piedini posteriori manuali
Ancoraggi e Predisposizioni:
• 6 ganci ad anello (3 per lato)
• 16 asole incassate per legatura carico (8 per lato)
• Asole supplementari sulle bande laterali
• Predisposizione per rampe di salita sul collo
• Predisposizione per verricello idraulico anteriore
Dotazioni aggiuntive:
• Rampe posteriori elettroidrauliche a due pezzi (3600 x 800 mm)
• 12 pneumatici Continental 235/75 R 17.5 con cerchi in acciaio
• 2 cassette porta attrezzi in zona collo
• Bordino rialzato sopra il collo
Costruzione e Garanzia:
• Produzione: Bulgaria – Omologazione Europea
• Garanzia: 5 anni sul telaio – Altri componenti secondo normativa vigente
Per informazioni e visione su appuntamento:
Telefono: show contacts (Emanuele)
Ufficio: show contacts
YouTube: show contacts
Instagram: show contacts
Facebook: show contacts
Sito web: show contacts